
ePropulsion Spirit 1.0 EVO Electric Outboard with Side-Mount Controller
ePropulsion Electric Motors
The Spirit 1.0 Evo includes ability for remote controller and steering, or upgraded tiller control with real-time digital display. The Evo model also includes industry first hydro-generation capability, where battery is charged while boat is operating under alternate power.
The ePropulsion EVO is designed for extensive use in the saltwater. We choose high-quality aluminium alloy as the base material, and apply anodizing coating and powder coating on top of it.
ePropulsion Spirit 1.0 EVO is a portable 1kW (~3HP) electric outboard made for dinghies, fishing boats, sailboats and tenders. It features a 1276Wh large integrated lithium battery for long range. It’s nimble, lightweight, and provides clean power.
The direct drive design means no ongoing maintenance required. Available with a Short or Long Shaft (see below for information to assist with your choice).
Wireless Controller:
This product comes complete with a wireless top-mount remote controller & display making it ideal for dinghies, ribs & tenders where the boat is driven from a centre console. The integrated display monitors real-time motor/battery status, for all Spirit 1.0 Evo, Navy Evo models, and Pod Evo models. The Evo top mount control has a built-in battery and it can be self-powered by its solar panel. When you use it with wireless connection and the control is at low battery level, you could charge the Evo top mount control with a communication cable (sold separately).
Steering Kit:
A steering kit (included) attaches to the ePropulsion EVO unit allowing your existing steering wheel and cable arrangement to steer the motor.
Downloads:
What's In The Box?
Each ePropulsion Spirit 1.0 EVO includes the following components:
Part Number | Shaft Length* | Suits Transom Height |
---|---|---|
EPP-SPIRIT10ERTMS |
Short | 40cm to 50cm |
EPP-SPIRIT10ERTML | Long | 50cm+ |
* See FAQs below for more details on choosing the correct shaft length.
Power | 1 kW (3HP equivalent) |
---|---|
Input Voltage | 39V – 60V |
Standard Battery | Spirit Battery Plus, 1276 Wh li-ion polymer |
Motor Weight | 10.6 kg (Shortshaft option) |
Battery Weight | 8.7 kg |
Charing Time | Standard charger: 8.5 Hrs Fast charger: 3.5 Hrs |
External Battery | Yes. E-Series Battery recommended |
Propeller | 11″ × 5.8″ 2-blade composite propeller |
Trim / Tilt Angle | 0°, 7°, 14°, 21° / 70° |
Shaft Length | Short: 62.5cm Long: 75cm |
Motor | Brushless DC motor |
Direct Drive | Yes |
Hydrogeneration | Yes |
Maintenance-Free | Yes |
If you are looking for an ePropulsion electric outboard for your boat, choosing the correct shaft length is important. If you go too long it would still work but it may lack performance. You will also risk hitting bottom or submerged objects more frequently such as rocks. If you go too short, that’s the worst scenario as you‘re more than likely going to cavitate.
Please note that ePropulsion has a different shaft length measurement from petrol-powered outboards. For electric outboards the shaft length is measured from the top of the clamp bracket to the center of the propeller. For petrol outboards it's measured from the top of the clamp bracket to the anti-ventilation plate.
ePropulsion's XS is close to S from Mercury.
ePropulsion's S is close to L from Mercury. ePropulsion's L is longer than L from Mercury.
To find the suitable shaft length, the principle is to make sure the top of the propeller is matched to the lowest point of the transom. Hard to put it into practice? Well, in order to get the right shaft length, first, measure the transom height, the length from the top of the boat transom to the bottom of the boat.
After that, you could choose the recommended shaft length based according to the transom height. Refer to the table above.
For most small dinghies and aluminium boats under 15ft or 4.5m, extra short shaft and short will work, depending on the transom height, some over 40 cm / 15.7 inches, some not.
For boats with the transom height higher than 50 cm / 19.7 inches, a long shaft version is more suitable.
For daysailers and short one-design racing sailboats, it depends on the position of the outboard mount. If you choose Spirit 1.0, we suggest you keep the outboard mount at a lower position so XS will work. That’s because XS takes less space to store inside the cabin.
For daysailers, sports boats and other sailing boats it’s best to measure the distance from the water line to the top of your outboard mount.
The Spirit 1.0 Evo upgrade includes ability for remote controller and steering, or upgraded tiller control with real-time digital display. The Evo model also includes industry first hydro-generation capability, where battery is charged while boat is operating under alternate power.
Yes, and an external battery power cable is required. We recommend the ePropulsion 48V E-Series Battery to extend the range. We also recommend a cowling for looking good when you remove the original Spirit battery.
Store the battery in the dry environment and keep the battery charge level at 60% around, and charge the battery every 3 months.
Yes, it is designed for extensive use in the saltwater. We choose high-quality aluminium alloy as the base material, and apply anodizing coating and powder coating on top of it. For more information see the article How did ePropulsion make an outboard corrosion-resistant?
Yes, Spirit 1.0 Plus will switch off after 30 mins without operation.